Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
interface thickness in level set method
Posted 2011年7月2日 GMT-4 14:23 Computational Fluid Dynamics (CFD) Version 4.2 1 Reply
Please login with a confirmed email address before reporting spam
Dear friends,
As I know the interface thickness in level set method depends on the parameter which the default value for this parameter is " tpf.hmax/2 ". when I want to reduce the interface thickness by changing this parameter , I have convergence problems and on the other hand by keeping the default value you have to use the fine mesh everywhere which results in memory problems.
i am using version v4.2 but even by using adapting meshing, the interface thickness depends on the maximum element size yet.
what should i do ??
best
As I know the interface thickness in level set method depends on the parameter which the default value for this parameter is " tpf.hmax/2 ". when I want to reduce the interface thickness by changing this parameter , I have convergence problems and on the other hand by keeping the default value you have to use the fine mesh everywhere which results in memory problems.
i am using version v4.2 but even by using adapting meshing, the interface thickness depends on the maximum element size yet.
what should i do ??
best
1 Reply Last Post 2011年7月5日 GMT-4 12:10
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
any suggestion ?