Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Time step of the time dependent solver
Posted 2011年9月1日 GMT-4 06:52 Studies & Solvers Version 4.2 0 Replies
Please login with a confirmed email address before reporting spam
for solving a flow model with coupled mass and heat transfer I use a time dependent solver. It seems, that it is more effectively to limit the time step as if the solver will recalculate the max. timestep again and again. By limiting the time step the solver runs with uniform timesteps , f.i. 50s, 50s, .... without solver fails. If I choose the limit to large, the solver recalculate the timestep again and again, f.i. 100s, 25s, 50s, 100s, 25s, 50s, ... I think falling back to a smaller timestep again and again costs calculation time.
During simulation the solution gets stady state and the timeteps can become larger.
Is there a way to control the max. possible timestep of the solver to incrase time step limit during sinulation? If I test Courant-criterion (CFL-Number) there are numbers >>1000 in the flow field, only near of inlet/outlet there are small CFL numbers.
How do COMSOL determine the max. time step?
Michael
Hello Michael Rembe
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.