Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Inverted mesh element near coordinates.
Posted 2011年9月7日 GMT-4 05:24 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
There was warning messages (ALE simulation) :
Inverted mesh element near coordinates (1.94001e-006, -1.45013e-008).
and also ,
The solver did not converge
the error message was
Singular matrix.
Last time step is not converged.
Is there any predictable boundary condition problems?
Thank you
There was warning messages (ALE simulation) :
Inverted mesh element near coordinates (1.94001e-006, -1.45013e-008).
and also ,
The solver did not converge
the error message was
Singular matrix.
Last time step is not converged.
Is there any predictable boundary condition problems?
Thank you
1 Reply Last Post 2011年9月7日 GMT-4 10:47
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
check (search) the forum there are many discussions around those points. I always recheck my BC when I get a singular matrix. Inverted mesh elements are not necesarily fully dammaging, but with ALE it indicates potential weak regions, or even faults so its worth to investigat the location and the deformed mesh.
Often its instructif to use plotting while solving to see how the solver progresses (not only the convergence value, but a few dependent paramters how they oscillate, or the ALE mesh how it distorts
--
Good luck
Ivar
check (search) the forum there are many discussions around those points. I always recheck my BC when I get a singular matrix. Inverted mesh elements are not necesarily fully dammaging, but with ALE it indicates potential weak regions, or even faults so its worth to investigat the location and the deformed mesh.
Often its instructif to use plotting while solving to see how the solver progresses (not only the convergence value, but a few dependent paramters how they oscillate, or the ALE mesh how it distorts
--
Good luck
Ivar