Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Applying a flux boundary condition with concentration as a limiting condition
Posted 2019年1月4日 GMT-5 17:59 Battery Design, Electrochemistry, Structural Mechanics Version 5.3a 2 Replies
Please login with a confirmed email address before reporting spam
Hello,
I am using 'Transport of Diluted Species' with a constant flux J0 boundary condition. I need to reverse this flux to -J0 when a maximum concentration is reached at the boundary. And then the flux must reverese back to +J0 when the concentration drops to 0 at the boundary. I need to perform this charge - discharge cycle multiple number of times.
Note - I cannot use a function of time to define this boundary condition as the time at which maximum and minimum concentration is reached is unknown.
Please login with a confirmed email address before reporting spam
You can use the event interface to do that. See the blog post entitled "Implementing a thermostat with the event interface" for a great introduction to the topic.
Jeff
-------------------Jeff Hiller
Please login with a confirmed email address before reporting spam
That worked perfectly. Thank you!!