Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Geometry Distribution
Posted 2011年10月17日 GMT-4 01:04 1 Reply
Please login with a confirmed email address before reporting spam
Hi all,
Is it possible to create/distribute any geometry randomly inside another geometry in COMSOL?
Is it possible to create/distribute any geometry randomly inside another geometry in COMSOL?
1 Reply Last Post 2011年10月17日 GMT-4 02:21
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
You have a difficult issue there, I have not so far worked with randomly distributed items. I believe you must use something like MATLAB to generate your geometry. And, as you state, selection etc will be a difficult issue, if it’s not that you may select all and remove one (or a few) big rectangle(s).
So long the small rectangles do not overlap, you do not really need to make any “difference”, as normally the “default union” mode will do it for you
--
Good luck
Ivar
You have a difficult issue there, I have not so far worked with randomly distributed items. I believe you must use something like MATLAB to generate your geometry. And, as you state, selection etc will be a difficult issue, if it’s not that you may select all and remove one (or a few) big rectangle(s).
So long the small rectangles do not overlap, you do not really need to make any “difference”, as normally the “default union” mode will do it for you
--
Good luck
Ivar