Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Use the solution of one model for another

Posted 2011年10月31日 GMT-4 18:05 Low-Frequency Electromagnetics, Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers Version 4.0 2 Replies

Jan Kumpfer
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hey everybody,
I'm running into a problem that should be fairly easy to solve but I just can't find out how.
I'm using the PDE solver to solve the GC pde to find the potential (charge) distribution for double layer in a particial geometry.
So far so good. Now I would like to use the resulting charge distribution(uxx + uyy, its a 2D model) and use some other physic (e.g. electrostatics) in the same geometry with it. How can i do that?

Thanks for any suggetstion!

Jan
2 Replies Last Post 2011年12月31日 GMT-5 06:41
COMSOL Moderator

Hello Jan Kumpfer

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Mohit Singhal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年12月31日 GMT-5 06:02
I am having the same problem !!


Any suggestions, Ivar ?

Please help.
I am having the same problem !! Any suggestions, Ivar ? Please help.
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年12月31日 GMT-5 06:41
Hi
well I'm hopefully not the onlyone that might answer ;)
I'm not sure I get fully the question, but if you solve a model once you have all results in the related data set, you can store the data ans chain directly another soving sequence, and in the solver node you can define which physics solves where, and for example that your initial conditions for solver2 is read from the stored solution 1 and not being the default all "0". But you can also access directly "mod1.whateverACDCphysics.uxx" in your other physics to use a result explicitely in an expression.

Now v4.0 was not really ironed out, so I'm not sure how this old version behaves with multiple solutions, if I remember right you need to define the steps manually in the solver.

--
Good luck
Ivar
Hi well I'm hopefully not the onlyone that might answer ;) I'm not sure I get fully the question, but if you solve a model once you have all results in the related data set, you can store the data ans chain directly another soving sequence, and in the solver node you can define which physics solves where, and for example that your initial conditions for solver2 is read from the stored solution 1 and not being the default all "0". But you can also access directly "mod1.whateverACDCphysics.uxx" in your other physics to use a result explicitely in an expression. Now v4.0 was not really ironed out, so I'm not sure how this old version behaves with multiple solutions, if I remember right you need to define the steps manually in the solver. -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content