Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Neutral condition
Posted 2011年11月7日 GMT+8 23:10 3 Replies
Please login with a confirmed email address before reporting spam
Hi all
can someone explain to me the meaning of the "neutral condition" of the velocity, and what is the difference between this condition and "no slip" condition ?
thank you
can someone explain to me the meaning of the "neutral condition" of the velocity, and what is the difference between this condition and "no slip" condition ?
thank you
3 Replies Last Post 2011年11月9日 GMT+8 16:56
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
I belive you should be slightly more specific, if you want a reply, ie. physics, BC case, something about your model, or ?
--
Good luck
Ivar
I belive you should be slightly more specific, if you want a reply, ie. physics, BC case, something about your model, or ?
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi Ivar,
thank you for the reply, i'm using "convection conduction" and "Navier stokes equations" to simulate natural convection due to one heated plate, my domain is a rectangle, i want to know which condition for the "navier stokes equation" must i impose on the heated plate boundary ? neutral or no slip ? what is the difference between this two boundaries ?
thank you for the reply, i'm using "convection conduction" and "Navier stokes equations" to simulate natural convection due to one heated plate, my domain is a rectangle, i want to know which condition for the "navier stokes equation" must i impose on the heated plate boundary ? neutral or no slip ? what is the difference between this two boundaries ?
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
I'm not following you, because in my v4.2a I cannot identify the BC you are referring to (probably you are in an older version and the naming has changed. Again it depends on the physics and model you have, normally a fluid is sticking to the wall so no-slip is the "natural one" with zero velocity at the border. But that depends somewhat on the fluid and the wall properties (and the scale of phenomena you are studying)
--
Good luck
Ivar
I'm not following you, because in my v4.2a I cannot identify the BC you are referring to (probably you are in an older version and the naming has changed. Again it depends on the physics and model you have, normally a fluid is sticking to the wall so no-slip is the "natural one" with zero velocity at the border. But that depends somewhat on the fluid and the wall properties (and the scale of phenomena you are studying)
--
Good luck
Ivar