Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Structure & Meshing Problem
Posted 2019年8月18日 GMT-4 21:42 0 Replies
Please login with a confirmed email address before reporting spam
I built a 3d model to study the flow characteristics of microfluidics, but I couldn't get accurate results due to differences in size. The size of the structure in the z direction is much larger than the dimensions in the x and y directions. I think it's a problem with meshing because it's hard to split the appropriate mesh. As shown, the flow direction of the fluid is along the x direction. The graphics obtained with the physics-controlled grid are strange, and sweeping the grid along the z-direction yields erroneous results. I want to know how this structure can simplify or divide the correct grid?
Attachments:
Hello Yaohuan Ding
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.