Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Modeling of soil-wall interface (Earth retaining wall)
Posted 2019年10月15日 GMT-4 01:46 Structural & Acoustics, Geomechanics, Structural Mechanics Version 5.4 0 Replies
Please login with a confirmed email address before reporting spam
Hi, I have been modelling a diaphragm wall with COMSOL. During the modelling I have faced problems to model the interface soil-wall.
It seems that to define an internal boundary condition, one needs to define “pairs”. At the beginning, we tried identity ones, but due to the nature of the problem I decided to take contact pairs instead, to allow new contacts and detachments. For this purpose, I have unsuccessfully tried:
1) Prescribed displacement coupled with a general extrusion to map only the normal displacement from one domain (the soil) to the other (the wall) (simulating frictionless with identity pairs)
2) Contact boundary condition (modelling with contact pairs)
Entually, I want to control the parameters of this interface (say from frictionless to a Mohr–Coulomb failure criteria) similar to what all specialist geomechanics software does.
Thank you for your help
Hello Mateo Garcia
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.