Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Infinite Elements Fluid Dynamics

Posted 2011年12月16日 GMT+8 06:55 Fluid & Heat, Computational Fluid Dynamics (CFD), Mesh, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.2a 4 Replies

Danielle Lower
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I want to model flow around a pipe. Instead of meshing a large block of air, is there a way to represent on of the air boundaries as infinite?
4 Replies Last Post 2011年12月27日 GMT+8 18:06
Chiwei Ong
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年12月16日 GMT+8 13:38
i am not sure whether you can impose open boundary or not. you may check the document.
i am not sure whether you can impose open boundary or not. you may check the document.
Akmal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年12月23日 GMT+8 18:02
hi,

yes, using convective cooling. h for free convection about 5-25 W/m²K. Or there is also a formula how to evaluate h for horizontal cylinder on free convection.

h ~ Fluid.temperatur-outer cylinder.temperatur and Diameter

regards
akmal
hi, yes, using convective cooling. h for free convection about 5-25 W/m²K. Or there is also a formula how to evaluate h for horizontal cylinder on free convection. h ~ Fluid.temperatur-outer cylinder.temperatur and Diameter regards akmal
Nagi Elabbasi Facebook Reality Labs
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年12月25日 GMT+8 02:30
Infinite elements are not suitable for this type of CFD analysis. If you want to model the air flow around the pipe you need to model and mesh a suitably sized block of air. If your interest is only the heat loss resulting from the air flow you can avoid modeling the air and setup instead a convective boundary condition on the external pipe surfaces as Akmal suggested.

Nagi Elabbasi
Veryst Engineering
Infinite elements are not suitable for this type of CFD analysis. If you want to model the air flow around the pipe you need to model and mesh a suitably sized block of air. If your interest is only the heat loss resulting from the air flow you can avoid modeling the air and setup instead a convective boundary condition on the external pipe surfaces as Akmal suggested. Nagi Elabbasi Veryst Engineering
Akmal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年12月27日 GMT+8 18:06
Hi All,

i'm not CFD expert (never use special CFD simulation software). But as far as i know, comsol is enough to do CFD simulation. There are modules to simulate fluid flow. To simulate air flow around a pipe it can be easely done.

there is some example, google thermos_laminar_flow.mph.

Comsol mesh can also be adapted for fluid or non-fluid.

happy holiday
akmal

Hi All, i'm not CFD expert (never use special CFD simulation software). But as far as i know, comsol is enough to do CFD simulation. There are modules to simulate fluid flow. To simulate air flow around a pipe it can be easely done. there is some example, google thermos_laminar_flow.mph. Comsol mesh can also be adapted for fluid or non-fluid. happy holiday akmal

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content