Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Comsol solver friezes and doesn't use RAM
Posted 2020年1月5日 GMT-5 03:42 Electromagnetic Heating, Studies & Solvers, Structural Mechanics Version 5.5 1 Reply
Please login with a confirmed email address before reporting spam
I am running Comsol 5.5, on win 7, 64 bit, with 32 GB of RAM, Solving a simple thermal stress problem. It was fine around 2 months ago, but now when I run that very same model, the answers aren't correct, and I found out 3 things: 1) when I plot for example temperature, it has a correct outcome for the few first steps, and then the plot doesn't change anymore ( so I guess the solver didn't solve the problem for the other steps) 2) before this very model was using 20-30 GB of RAM, and now it only uses 2-3 GB. 3) I have around 4500 time steps when I reduce the time steps, the number of steps with correct answer increases.
I can't stress this enough, 2 months ago it was working fine... I even uninstalled and then installed the Comsol again, and it didn't work.
Please login with a confirmed email address before reporting spam
Hi Amir,
please send the affected model file to support@comsol.com and we will have a look and try to figure out what is causing the problems.
Best wishes, Lars Drögemüller