Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Changing the inlet velocity for turbulence flow model
Posted 2020年2月8日 GMT-5 22:42 Fluid & Heat, Computational Fluid Dynamics (CFD), Parameters, Variables, & Functions 0 Replies
Please login with a confirmed email address before reporting spam
I tried to change the inlet velocity for my pipe model and compute. However, the velocity magnitude derived from the result is not equal to the one I entered in the inlet velocity. For example, I entered the inlet velocity as 4 m/s and the velocity magnitude generated is only 2 m/s. Moreover, whatever value of the inlet velocity I changed such as 5, 10, 15 m/s, the velocity magnitude are still remained as 2 m/s. I want to investigate the effect of the increasing of the velocity in my pipe model.
Hope can get your help, thank you.
Hello Han Choi
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.