Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Simulating large deformations of a bending beam in a fluid
Posted 2020年3月3日 GMT-5 08:38 Structural & Acoustics, Fluid & Heat, Mesh Version 5.4 0 Replies
Please login with a confirmed email address before reporting spam
Hello, I want to simulate large deformations of a bending beam in a fluid. I use Solid Mechanics, Creeping Flow and Moving Mesh (ALE) but I get mesh related errors due to distortion of mesh. I’ve tested several alternatives but none works:
Automatic remeshing: Condition for remeshing fulfilled after remeshing or maximum number of iterations reached.
Remeshing a deformed configuration: Inverted elements error in some time steps or too many degrees of freedom error.
Automatic refinement: Convergence problem.
*I turn Consistent initialization on.
I’ve tested different meshes: triangular, quad, mapped mesh with different sizes, corner refinement and boundary layers. I followed steps explained in “Model Translational Motion with the Deformed Mesh Interfaces” and other COMSOL users forum posts with similar problem. How could I fix these issues? Is there any example for large deformation and its optimal configuration?
Hello Andres SB
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.