Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Plotting electric fields along plane for MEF coil simulation
Posted 2020年5月17日 GMT-4 04:30 Electromagnetics, Low-Frequency Electromagnetics Version 5.3a 3 Replies
Please login with a confirmed email address before reporting spam
Hello,
I'm relatively new to COMSOL and I'm trying to simulate the electric field created by an AC current within a toroidal coil. I have been able to simulate the B-field in the axisymmetric builder for a standard coil, but I now need to use the 3D builder for future arbitrary coil shapes. My objective for now is to simulate a coil with 1 amp of current at some frequency and observe the electric field values (and also electric field gradient values) along some plane lying above that coil.
I have currently created a coil, put a box around it to represent air, and have run the simulation but it has been running for hours - is there a simpler way to do this?
Please login with a confirmed email address before reporting spam
If you are not interested in capacitive effects in the coil, you may consider to set it up in mf.
-------------------Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Please login with a confirmed email address before reporting spam
If you are not interested in capacitive effects in the coil, you may consider to set it up in mf.
If I set it up in mf, how can I view/calculate electric field values?
Please login with a confirmed email address before reporting spam
The induced electric field is available in mf. Check the result variables.
-------------------Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com