Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Welding Heat Source

Posted 2020年8月27日 GMT-4 05:37 Version 5.4 1 Reply

Kandasamy J
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

How to move a heat source in welding 1. Friction Stir welding 2. Arc welding in COMSOL

1 Reply Last Post 2020年8月27日 GMT-4 13:52
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 2020年8月27日 GMT-4 13:52
Updated: 4 years ago 2020年8月27日 GMT-4 14:17

Hello Kandasamy,

Moving heat sources were recently discussed in this Discussion Forum, see this thread for a couple of starting points. In addition, this blog post on friction stir welding should be of interest to you.

Best regards,

Jeff

-------------------
Jeff Hiller
Hello Kandasamy, Moving heat sources were recently discussed in this Discussion Forum, see [this thread](https://www.comsol.com/forum/thread/267461/ray-heating?last=2020-08-25T19:28:36Z) for a couple of starting points. In addition, [this blog post](https://www.comsol.com/blogs/examining-heat-transfer-in-a-friction-stir-welding-process/) on friction stir welding should be of interest to you. Best regards, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content