Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Time dependent analysis
Posted 2012年3月12日 GMT-4 12:04 Version 4.0a, Version 4.2a 2 Replies
Please login with a confirmed email address before reporting spam
Dear Moderator and COMSOL Users,
Hope you are well. I did a simulation using time dependent analysis of COMSOL Multiphysics. But as new user, I am confused about the physical settings of the model, is it correct or not? When I rerun(compute) the time dependent study, sometimes there are lot of error are generated and confused about the simulation result. Here In the model, I used five domain for the simulation purposes and I am looking to see the Pressures or displacement of piezoelectric with respect to time (range 0 to 10ms, step size 1us).
I would be thankful to you if you give me feedback or modifications regarding the topics.
Thanks
D Bhuyan
Hope you are well. I did a simulation using time dependent analysis of COMSOL Multiphysics. But as new user, I am confused about the physical settings of the model, is it correct or not? When I rerun(compute) the time dependent study, sometimes there are lot of error are generated and confused about the simulation result. Here In the model, I used five domain for the simulation purposes and I am looking to see the Pressures or displacement of piezoelectric with respect to time (range 0 to 10ms, step size 1us).
I would be thankful to you if you give me feedback or modifications regarding the topics.
Thanks
D Bhuyan
2 Replies Last Post 2012年3月12日 GMT-4 13:10
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Isn't PMMA an isolator? It seems a bit strange that pmma is the part of the connector
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
hmm