Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

MEMS: Thermal Expansion

Posted 2012年3月15日 GMT-4 01:55 MEMS & Nanotechnology, Heat Transfer & Phase Change, MEMS & Piezoelectric Devices, Structural Mechanics Version 4.2a 3 Replies

Vineet
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

HI

I have designed a MEMS micro heater for gas sensing applications. I have used joule heating and considered platinum as the material for the heater.
I have obtained the temperature and want to know the thermal expansion.
I have used solid mechanics and joule heating with thermal expansion but not able to achieve accurate results.

I am enclosing the file for the troubleshooter reference only.

Vineet Bansal
Project Associate, NPMASS
Electronic Science Department
Kurukshetra University, Haryana

Attachments:

3 Replies Last Post 2012年3月21日 GMT-4 05:58
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年3月15日 GMT-4 10:13
Hi

TEM (solving for T, V and _u_) should do that.

TEM is a "pre" assembly of JH (T+V) and + Solid (_u_) or of HT (T) + EC (V) and SOLID (_u_)

check your dependent variables when you select your physics, and be sure you do not dedouble the SAME variable when combining physics

--
Good luck
Ivar
Hi TEM (solving for T, V and _u_) should do that. TEM is a "pre" assembly of JH (T+V) and + Solid (_u_) or of HT (T) + EC (V) and SOLID (_u_) check your dependent variables when you select your physics, and be sure you do not dedouble the SAME variable when combining physics -- Good luck Ivar
Vineet
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年3月21日 GMT-4 04:38

I checked those variables and all are right, still its not happening sir

and the model file is too long to attach (25 mb)

Please provide me your mail link

--
Vineet Bansal
Project Associate, NPMASS
Electronic Science Department
Kurukshetra University, Haryana
I checked those variables and all are right, still its not happening sir and the model file is too long to attach (25 mb) Please provide me your mail link -- Vineet Bansal Project Associate, NPMASS Electronic Science Department Kurukshetra University, Haryana
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年3月21日 GMT-4 05:58
Hi

before you upload any file clen the solution with a Edit Clear all solution, clear all mesh, File reset history + save as with another name. Then before you upload, if important for you, check that nothing confidential remains, such as designs, materials or even file shorcuts that might give others a clue for whom you are working. Here on the Forum everything is open, mainly for free discussions where we all can share "public" issues

--
Good luck
Ivar
Hi before you upload any file clen the solution with a Edit Clear all solution, clear all mesh, File reset history + save as with another name. Then before you upload, if important for you, check that nothing confidential remains, such as designs, materials or even file shorcuts that might give others a clue for whom you are working. Here on the Forum everything is open, mainly for free discussions where we all can share "public" issues -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content