Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Usage of different meshes in related study steps?
Posted 2020年12月10日 GMT-5 05:37 Computational Fluid Dynamics (CFD), Mesh, Studies & Solvers Version 5.6 0 Replies
Please login with a confirmed email address before reporting spam
I would like to run a CFD + Heat Transfer study consisting of several study steps. The results of each study step are used as initial values for the solution of the next study step. My question is: Is it possible to solve Study Step 1 with Mesh 1 and Study Step 2 with Mesh 2, while using the results of Study Step 1 as initial values for Study Step 2?
The background is that Mesh 2 is extremely large, which in this case is necessary for accurate results. To reduce calculation time, I would like to solve the first steps with a coarser mesh and only use the fine mesh for the last step. All meshes are user-generated.
Any comment or contribution is highly appreciated.
Hello Finn Steegers
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.