Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Make material parameter change based on Frequency of solver
Posted 2020年12月18日 GMT-5 10:30 Low-Frequency Electromagnetics, RF & Microwave Engineering, General Version 5.5 3 Replies
Please login with a confirmed email address before reporting spam
How can I make a material, such as permittivity, pull from a function or list based on the freqency the solver is using?
For example, if a material as a permittivity at 100MHz and another at 10GHz, how can I have that handled without manually editing the material, then recalulating the mesh, then recomputing? I'd much rather just run a compute once with both parameters.
(Note I am using Comsol 5.5, and cannot upgrade to 5.6 at this time)
Please login with a confirmed email address before reporting spam
Permittivity (and a lot of other things) can be an explicit function of frequency.
Please login with a confirmed email address before reporting spam
Permittivity (and a lot of other things) can be an explicit function of frequency.
Is there a tutorial on explicit function linking like this that you could please point to?
Please login with a confirmed email address before reporting spam
You don't need a tutorial. An example
replace 4 for permittivity by 4 -2*(freq>1[GHz])