Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to input a time-varying (sinusoidal) heat rate?
Posted 2021年1月12日 GMT-5 14:44 General, Heat Transfer, Parameters, Variables, & Functions 2 Replies
Please login with a confirmed email address before reporting spam
Hi all,
I am using the Heat Transfer and Laminar Flow modules within Comsol for a time dependent simulation. For my initial model I added a heat source by specifying a constant value for the heat rate -which is essentially a step function starting at time = 0. I am trying to adjust this now so the heat rate is time-varying and specified by a sinusoidal function. I found this previous thread which says I can replace the constant value with something like 'Asin(Bt)+C'. However, when I do this I get the error message / warning: "unexpected unit of input". Does anyone know what I am doing wrong? Does COMSOL have a built in variable that you can use to specify time?
Thank you
Please login with a confirmed email address before reporting spam
Hello Vivek,
Mathematical functions like sin expect a scalar input, so check if your B has dimensions of 1/time. That's likely your problem.
Best,
Jeff
-------------------Jeff Hiller
Please login with a confirmed email address before reporting spam
Hello Vivek,
Mathematical functions like sin expect a scalar input, so check if your B has dimensions of 1/time. That's likely your problem.
Best,
Jeff
Thanks! This solved the issue.