Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to plot potential along semi-circular arc

Posted 2021年1月28日 GMT-5 12:30 Low-Frequency Electromagnetics Version 5.5 1 Reply

Anwesha Sahu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am simulating a model with a charge at potential 5000V at the centre of a circle of radius 5m in 2D axis-symmetric mode. I would like to plot a line graph of how the electric potential varies along an arc of radius 2m inside this circle. How can I do so?

I'm a new user to COMSOL and would appreciate any help.

1 Reply Last Post 2021年1月28日 GMT-5 13:09
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 2021年1月28日 GMT-5 13:09

Assuming you already have the rest of the model setup with appropriate boundary conditions to compute the potential everywhere, and that it works fine, then: 1. Go back to the Geometry section. Draw the arc. I am presuming you mean the arc to be in the r-z plane. (Right?) 2. Re-mesh and re-execute the problem. 3. Under Results, create a 1D plot group. Add a line graph to it. Choose the arc as the selection for the line graph. 4. Plot your answer. I've attached an example which should be similar enough.

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
Assuming you already have the rest of the model setup with appropriate boundary conditions to compute the potential everywhere, and that it works fine, then: 1. Go back to the Geometry section. Draw the arc. I am presuming you mean the arc to be in the r-z plane. (Right?) 2. Re-mesh and re-execute the problem. 3. Under Results, create a 1D plot group. Add a line graph to it. Choose the arc as the selection for the line graph. 4. Plot your answer. I've attached an example which should be similar enough.

Attachments:

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content