Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Meshing finer at specific boundaries (interface between two materials)

Posted 2021年2月22日 GMT-5 08:52 Mesh 3 Replies

Sarab Aha
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear ALL,

I would need your help with regard to meshing. I am styding a bi-layer material (film on top of a substarte) and I am trying to resolve the mesh to get finer mesh at the boundaries (where i have corners). i can chose a small element size for the whole structure which results in consuming camputation, so i only want fine element at the interface between the film and substare and essentially at the corners (picture attached). 1- What is the best way to get a mesh similar to that in the picture. 2- or how to get a mesh which is finer at boundaries but get coarser far from boundaries (graded elemnt size)?

Best regards

3 Replies Last Post 2021年2月22日 GMT-5 10:44
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 2021年2月22日 GMT-5 10:35
Updated: 4 years ago 2021年2月22日 GMT-5 10:41

Hello Sarab,

A mesh that is finer near a particular set of boundaries is indeed something you can create easily in COMSOL. I would recommend this video on meshing in the Learning Center, as well as Chapter 8 in the Reference Manual (Accessed through the File > Help > Documentation menu within the COMSOL Multiphysics GUI) for information on meshing capabilities and example tutorials.

Best,

Jeff

-------------------
Jeff Hiller
Hello Sarab, A mesh that is finer near a particular set of boundaries is indeed something you can create easily in COMSOL. I would recommend [this video on meshing in the Learning Center](https://www.comsol.com/learning-center/building-the-mesh-for-a-model-geometry-in-comsol-multiphysics), as well as Chapter 8 in the Reference Manual (Accessed through the File > Help > Documentation menu within the COMSOL Multiphysics GUI) for information on meshing capabilities and example tutorials. Best, Jeff
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 2021年2月22日 GMT-5 10:36
Updated: 4 years ago 2021年2月22日 GMT-5 10:38

You should use a user-controlled mesh. You can choose values for maximum mesh sizes individually in domains, on surfaces, along lines, and around points. For example, the attached screen shot shows a circle where one arc has been meshed much more finely than the rest of it.

Added: Looks like Jeff Hiller got to this first. :)

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
You should use a user-controlled mesh. You can choose values for maximum mesh sizes individually in domains, on surfaces, along lines, and around points. For example, the attached screen shot shows a circle where one arc has been meshed much more finely than the rest of it. Added: Looks like Jeff Hiller got to this first. :)

Attachments:

Sarab Aha
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 2021年2月22日 GMT-5 10:44

Dear Jeff and Robert,

Thank you for the prompt reply. I indeed got to solve the problem through user controlled mesh (with edges refinement and distribution nodes).

Best

Dear Jeff and Robert, Thank you for the prompt reply. I indeed got to solve the problem through user controlled mesh (with edges refinement and distribution nodes). Best

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content