Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
waveguide power flow transmission
Posted 2012年5月6日 GMT-4 21:45 RF & Microwave Engineering 0 Replies
Please login with a confirmed email address before reporting spam
I'm designing a device coupled with a straight waveguide right now. I used port 1 and port 2 for the input and output of the waveguide, and would like to obtain the power flow transmission from the output port. I excited the input port as single mode TE wave, and solve the two ports by boundary mode analysis. I integrate the power flow at output port boundary and obtain the transmission. But I would like to know if I integrate the power flow at the input boundary, is the value means the reflection? I suppose that the port boundary doesn't include the reflection waves, is that right?
Thank you so much and look forward to the answer.
Hello Yu-Hsin Liu
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.