Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

saving geometry as .mphbin file

Please login with a confirmed email address before reporting spam

Hi,

New user. How do save a geometry I created as '.mphbin' (or any other format) for future use? Thanks.

1 Reply Last Post 2012年5月11日 GMT-4 10:04
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年5月11日 GMT-4 10:04
Hi

you can export it from the COMSOL GUI, but its a COMSOL internal format so from my knowledge it can only be reopened in COMSOL, onthe other hand so far the geometry format has had little changes, so there are great chances you can open it in a futur version of COMSOL. for more details on how long COMSOl warranty to read a file, you should check directly with COMSOL, we user just hope its something tending towards INF, even if we know that for IT people INF has a tendency to be rather short ;)

--
Good luck
Ivar
Hi you can export it from the COMSOL GUI, but its a COMSOL internal format so from my knowledge it can only be reopened in COMSOL, onthe other hand so far the geometry format has had little changes, so there are great chances you can open it in a futur version of COMSOL. for more details on how long COMSOl warranty to read a file, you should check directly with COMSOL, we user just hope its something tending towards INF, even if we know that for IT people INF has a tendency to be rather short ;) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.