Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

surface to surface radiation in heat transfer in solids

Farhad Kazemi Khosroshahi

Please login with a confirmed email address before reporting spam

Hi every body,

in "heat transfer in solids" interface settings, in the "physical mode" tab there is "surface to surface radiation" option. does COMSOL includes "surface to surface radiation" in calculation by only selecting this option in this menu?

2 Replies Last Post 2012年10月10日 GMT-4 07:05
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年5月20日 GMT-4 09:07
Hi

as often the reply is yes and no:
Adding radiative exchange requires that you need to ensure you material data have the corresponing characteristics, and that you have defined BCs correctly for the radiative exchange. The most delicate issue with radations is mostly the definition of the "view" factors

--
Good luck
Ivar
Hi as often the reply is yes and no: Adding radiative exchange requires that you need to ensure you material data have the corresponing characteristics, and that you have defined BCs correctly for the radiative exchange. The most delicate issue with radations is mostly the definition of the "view" factors -- Good luck Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年10月10日 GMT-4 07:05
Hi Ivar
please tell me about correct BC in radiation problems.
thank you
Hi Ivar please tell me about correct BC in radiation problems. thank you

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.