Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Convergence issue

Posted 2012年6月22日 GMT-4 05:09 Chemical Reaction Engineering, Studies & Solvers Version 4.2a 0 Replies

Patricio Davila
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello all,

I'm having a problem with convergence in comsol 4.2a. I'm running a simulation and at a certain time the non-linear solver starts to present convergence problem (for example taking to many iterations). At this point it looks like my simulation will take forever to converge.

However, if I stop the simulation, and then continue it it works perfectly again for some time (sometimes for the rest of the simulation). Does anybody knows if there is a way to address this issue? Is there any way to make the simulation run altogether without having to stop it every once in a while?

Thank you for your help.

--
Patricio Davila
0 Replies Last Post 2012年6月22日 GMT-4 05:09
COMSOL Moderator

Hello Patricio Davila

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content