Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to know the sign of the velocity ?

Posted 2012年6月30日 GMT-4 09:29 Fluid & Heat, Computational Fluid Dynamics (CFD) Version 4.3 4 Replies

Osameh Ghazian
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,
I need to know the sign of the velocity in my model , It seems that there is no option in COMSOL. I have tired different probes but all of them give you the magnitude of the velocity. I need to know when the velocity change its direction so I need to know the sign.
Best
4 Replies Last Post 2012年7月2日 GMT-4 01:40
Mohtadin Hashemi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年6月30日 GMT-4 10:41
Hi,

Have you tried streamlines? Or do you want more information than that?

regards,
Hi, Have you tried streamlines? Or do you want more information than that? regards,
Nagi Elabbasi Facebook Reality Labs
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年7月1日 GMT-4 13:03
You are probably requesting the velocity magnitude which cannot be negative. You should instead look at the components of the velocity vector.

Nagi Elabbasi
Veryst Engineering
You are probably requesting the velocity magnitude which cannot be negative. You should instead look at the components of the velocity vector. Nagi Elabbasi Veryst Engineering
Osameh Ghazian
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年7月1日 GMT-4 18:57
Hi Nagi,
I have also tried the components but they are all positives.
Hi Nagi, I have also tried the components but they are all positives.
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年7月2日 GMT-4 01:40
Hi
well normally u,v,w are positive in the +x,y,z directions, but you should be able to pplot the gradients too, this can also give you info when the flow changes direction

--
Good luck
Ivar
Hi well normally u,v,w are positive in the +x,y,z directions, but you should be able to pplot the gradients too, this can also give you info when the flow changes direction -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content