Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

adding heat flux as a variable

Posted 2021年12月9日 GMT-5 18:03 Heat Transfer & Phase Change, Heat Transfer, Parameters, Variables, & Functions Version 5.6 1 Reply

Divya Patel
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hello this is urgent question, i m having trouble defining heat flux in terms of an equation here the eqation is as follows here the l2 i have alredy defined. z is just the z axis changing and q_0 would also be constant. this is for heat tranfers in fluids. for a stionary study

1 Reply Last Post 2021年12月10日 GMT-5 04:49
Magnus Ringh COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 3 years ago 2021年12月10日 GMT-5 04:49

Hi Divya,

This is straightforward in COMSOL Multiphysics. Just type it in as

q_0*(1+2*z/I2)*(1-2*z/I2)

For the expression's unit to be compatible with a heat flux, q_0 should have the SI unit W/m^2 or similar, and I2 should have the SI unit meter or similar.

Best regards,

Magnus

Hi Divya, This is straightforward in COMSOL Multiphysics. Just type it in as `q_0*(1+2*z/I2)*(1-2*z/I2)` For the expression's unit to be compatible with a heat flux, `q_0` should have the SI unit W/m^2 or similar, and `I2` should have the SI unit meter or similar. Best regards, Magnus

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content