Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
change in units
Posted 2012年7月13日 GMT-4 10:31 Low-Frequency Electromagnetics, Geometry, Parameters, Variables, & Functions Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
Hi everybody,
I'm doing a current stimulation of a nerve fiber.
I changed the geometry units from meters to micrometers.
When i input the value of amped in my stimulation the units net to the blank gap to fill are still A/m and not A/micrometer.
If i leave 1 A there it looks like he consideres this as 1 A/micrometer. Is that so? I need to know this is order to progress nmy modeling.
Thank you for your time and effort,
Giorgio.
I'm doing a current stimulation of a nerve fiber.
I changed the geometry units from meters to micrometers.
When i input the value of amped in my stimulation the units net to the blank gap to fill are still A/m and not A/micrometer.
If i leave 1 A there it looks like he consideres this as 1 A/micrometer. Is that so? I need to know this is order to progress nmy modeling.
Thank you for your time and effort,
Giorgio.
1 Reply Last Post 2012年7月14日 GMT-4 12:09
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
the "mm" units are only for the gemomtry, the physics remain in SI or whatever you have choosen as base units
--
Good luck
Ivar
the "mm" units are only for the gemomtry, the physics remain in SI or whatever you have choosen as base units
--
Good luck
Ivar