Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

change in units

Please login with a confirmed email address before reporting spam

Hi everybody,
I'm doing a current stimulation of a nerve fiber.
I changed the geometry units from meters to micrometers.
When i input the value of amped in my stimulation the units net to the blank gap to fill are still A/m and not A/micrometer.
If i leave 1 A there it looks like he consideres this as 1 A/micrometer. Is that so? I need to know this is order to progress nmy modeling.
Thank you for your time and effort,
Giorgio.

1 Reply Last Post 2012年7月14日 GMT-4 12:09
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年7月14日 GMT-4 12:09
Hi

the "mm" units are only for the gemomtry, the physics remain in SI or whatever you have choosen as base units

--
Good luck
Ivar
Hi the "mm" units are only for the gemomtry, the physics remain in SI or whatever you have choosen as base units -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.