Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Bend loss in a step index fiber

Please login with a confirmed email address before reporting spam

Hi,

I am tying to simulate bend loss calculation in a single mode fiber and getting electric field in clad area which is not expected result and please help me to find out what I am doing wrong.

The brief description on the problem:
Core radius=4.5 micron and RI function of radius and angle
Clad radius=62.5 micron and RI function of radius and angle (up to radius, 46mm which less than Max core RI) and remaining is function of angle
PML radius =72.5 and RI function of angle
Bend radius=10 mm

The MPH file is attached to know details of case setup.

The result shows that electric field concentrates in clad region which is not correct.

Thanks,
Ramesh


0 Replies Last Post 2012年7月18日 GMT-4 04:42
COMSOL Moderator

Hello Ramesh Behera

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.