Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Various Problems for Two Phase Flow coupling with Electrostatic

Posted 2012年7月18日 GMT-4 20:03 Low-Frequency Electromagnetics, Fluid & Heat, Computational Fluid Dynamics (CFD), Microfluidics, Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers Version 4.2a 2 Replies

Chan Hoong Cheong
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi! I am working on Two Phase Flow coupling with Electrostatic using transient (phase initialization and time dependent) solver to simulate electrospray phenomenon, I have encounter some problems and wish to get some opinion from you all! My problem:

1.When I set my Electric Potential to 1000 V, the solver able to solve it, when I want to solve in 5000 V, the solution cannot converge or it take too long time to solve. I knew that there is a way called “continuation parametric sweep” , but I am not really understand how to set up as I wish to use my successful 1000 V result as reference for my 5000 V case, is it the correct method to go for?

2.I understand that in Two Phase Flow, either Level Set or Phase Field method, there would be some mass loss/inaccurate interface but can be fix by switch on the “Conservative Form” at the Advanced Settings, but the solution seems to take forever to converge, what is going on?

3.To couple both physics, I use the method as in the “Electrocoalescence” in the Model Library. Is it any possibility that the Electric Force that I set up and put it in the Volume Force can focus on apply on the liquid-gas interface?
If anyone wish to take a look on my model, I am more than happy to upload it here!

Thank you for your time!

Best Regards,
Cheong
2 Replies Last Post 2014年4月27日 GMT-4 05:18
COMSOL Moderator

Hello Chan Hoong Cheong

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Fucheng Deng
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年12月25日 GMT-5 04:22
Dear Chan
I met the problem you had ever met, can you give me some help?
Thanks so much
Deng
Dear Chan I met the problem you had ever met, can you give me some help? Thanks so much Deng
Neo Shvr
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年4月27日 GMT-4 05:18
Check this article, it may be useful Electrophoresis 2013,34, 736-744
onlinelibrary.wiley.com/doi/10.1002/elps.201200300.pdf

and please let me know if it helps.

Regards
Check this article, it may be useful Electrophoresis 2013,34, 736-744 onlinelibrary.wiley.com/doi/10.1002/elps.201200300.pdf and please let me know if it helps. Regards

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content