Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Large difference of results between 2D and 3D model: Displacement field
Posted 2022年3月16日 GMT-4 06:35 Electromagnetics, Acoustics & Vibrations, Structural Mechanics Version 6.0 0 Replies
Please login with a confirmed email address before reporting spam
Hello all.
I am modeling the displacement field in COMSOL using the Solid mechanics module. As a perturbation source I am using acoustic radiation force as a body load in COMSOL. To derive the acoustic radiation force, I simulated an acoustic pressure intensity field in FIELD II and then I implemented this intensity field in COMSOL using the interpolation (near neighbor) function. After that I defined acoustic radiation force in terms of Intensity using the variable subnode in COMSOL.
I also applied damping methods: (A) Rayleigh damping, (B) Spring foundation, (C) Added mass, in my model.
I started my modeling in 2D and got meaningful results, however applying the same simulation parameters in the 3D model, I am getting unexpected results and not able to validate my model in 3D.
Can anyone please explain to me why?
Hello Abhijit Paul
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.