Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

HOW TO APPLY A SIMPLE CONSTRAINT IN COMSOL

Posted 2012年7月26日 GMT-4 17:19 Chemical Reaction Engineering Version 4.2a, Version 4.3 2 Replies

Dao Trinh (COMSOL)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

This is the simple problem of the precipitation in a solution.
We got a concentration of [A+], and concentration of [B-].

And the constraint in solution is: [A+]*[B-] = Ksp (solubility constant).
Are there any way to apply this constraint, this is not reaction rate (R). It is a condition depending on [A+], and [B-] which vary with time.
2 Replies Last Post 2012年7月27日 GMT-4 08:09
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年7月27日 GMT-4 04:32
Hi

what about adding a equation [A+]*[B-] - Ksp = 0 over your domain or bounary ?

--
Good luck
Ivar
Hi what about adding a equation [A+]*[B-] - Ksp = 0 over your domain or bounary ? -- Good luck Ivar
Dao Trinh (COMSOL)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年7月27日 GMT-4 08:09
Yes. But how to do that Ivar?
In Comsol, when we play with reaction, the equation comes with the reaction rate form.

That means: dc/dt = mass transport + rate

I'm finding the way to implement as the constraint form: [a]*[b] = constant
Yes. But how to do that Ivar? In Comsol, when we play with reaction, the equation comes with the reaction rate form. That means: dc/dt = mass transport + rate I'm finding the way to implement as the constraint form: [a]*[b] = constant

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content