Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Modelling transport of species in porous media
Posted 2012年9月25日 GMT-4 09:06 Version 4.3 1 Reply
Please login with a confirmed email address before reporting spam
I hope someone can give me some advice. We are currently modelling pyrolysis of large coal particles which involves including for reaction kinetics, heat transfer and mass transfer. We have decided to describe conservation of volatile products formed by the Darcy law and transport of species in transport media respectively. The volatile products consist of product gases and water vapour and therefore I have defined two species in the transport of species in porous media module. As you know the module requires the inclusion of a velocity, which in this case is the velocity calculated from the Darcy equation. The problem however is to calculate the correct velocity, which requires that the total pressure of the total gas mixture (products and initial air) must be determined. I am struggling to link desnities I obtain fro the different species with the Darcy module inlcuding for total pressure?
Any suggestions?
Kind regards
Hello Burgert Hattingh
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam