Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

how to model this?

Posted 2012年10月1日 GMT-4 08:28 Structural Mechanics Version 4.2a 1 Reply

Siva Kumar Manickam
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,
I have a cylindrical shaft in a solid domain. The cylinder is being pushed down. I want to see the deformation of non-linear solid domain.

Please see the attached figure.

I used structural mechanics module, and applied force as a boundary load. But not getting as expected. How to go about this?

Thanks for reading.
1 Reply Last Post 2012年10月1日 GMT-4 16:27
Nagi Elabbasi Facebook Reality Labs
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年10月1日 GMT-4 16:27
hi Siva,
No figure attached. Please upload again.
hi Siva, No figure attached. Please upload again.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content