Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Stop condition expression
Posted 2012年10月2日 GMT+8 09:13 Version 4.3 4 Replies
Please login with a confirmed email address before reporting spam
Hello Collin Mui
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
The stop condition expression that I use is
mod1.ppb1<0.1
where mod1 is the index from the model and ppb1 is the point probe.
The expression is well evaluated and the model works but the stop condition isn't.
Does anybody know why?
Paul
Please login with a confirmed email address before reporting spam
mod1.ppb1-0.1
the model stops when the point value reaches the value 0.1, therefore it works. But what about "less than" ?
Please login with a confirmed email address before reporting spam
I was killing my brain with this and finally I have discovered how it works.
Just write:
0.5-(modx.ppby<value)
where x and y denote the index of model and probe evaluation and the value is the desired value. My example:
0.5-(mod1.ppb1<0.02)
Please login with a confirmed email address before reporting spam