Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Compute centrifugal force on a rotor
Posted 2023年2月22日 GMT-5 12:16 Electromagnetics, Studies & Solvers, Modeling Workflow Version 6.0 1 Reply
Please login with a confirmed email address before reporting spam
I'm currently working on the topology optimization of a rotor for a PM motor for a Formula Student race car. To perform the topology optimization, I would like to impose a constraint dealing with the strain and stress acting on the rotor for a certain working conditions (20 000 rpm). Do you have an idea how can I compute the maximum stress and stain on the topology to take into account centrifugal force?
Thank you very much.
Clayson Thomas
Please login with a confirmed email address before reporting spam
Dear Thomas Clayson,
to track the maximum of the stress and include this in the optimization you would need to set up the p norm, as shown in the resources below: https://www.comsol.de/blogs/equation-based-modeling-with-a-space-time-discretization/
https://www.comsol.de/model/topology-optimization-of-loaded-knee-structure-with-a-maximum-stress-constraint-75821
To include the centrifugal forces in your structural mechanics simulation you can add the volume force -> rotating frame to your rotor.
I hope that these information are helpful. Kind regards, Philipp Buchsteiner