Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Center fixed constraint

Posted 2023年3月21日 GMT-4 20:46 Studies & Solvers, Structural Mechanics 1 Reply

Kayla Lowry
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi I am currently working on a project where I am modeling a system we did in lab. to do this we placed a clamp on a rectangular beam in the center of the beam and found its frequency. Is it possible to model a beam with a fixed constraint in the center and then run a eigen-frequency on the two resulting sides. please let me know if this makes sense and if it is possible. :)

1 Reply Last Post 2023年3月25日 GMT-4 11:53
Acculution ApS Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 years ago 2023年3月25日 GMT-4 11:53

This sounds like a very standard problem that you can do in COMSOL Multiphysics.

-------------------
René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com
This sounds like a very standard problem that you can do in COMSOL Multiphysics.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content