Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

jkh

Posted 2012年10月10日 GMT+8 20:55 3 Replies

Grazia Spatafora
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

vsdgv
3 Replies Last Post 2012年10月11日 GMT+8 16:05
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年10月11日 GMT+8 13:04
Hi

I believe you should consider a Definition model coupling mapping or projection operator to link your periodic domains, or perhaps there are an "antisymmetric pair" option in CFD, newer checked

--
Good luck
Ivar
Hi I believe you should consider a Definition model coupling mapping or projection operator to link your periodic domains, or perhaps there are an "antisymmetric pair" option in CFD, newer checked -- Good luck Ivar
Grazia Spatafora
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年10月11日 GMT+8 15:55
kfmf
kfmf
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年10月11日 GMT+8 16:05
Hi

Check for Model Coupling under Definition in v4 and check the Projection and mapping operators, + doc
For your case inflow = outflow on other boundary you need to inverse the sign of the components, w.r.t up/down boundary, that's all ;)

--
Good luck
Ivar
Hi Check for Model Coupling under Definition in v4 and check the Projection and mapping operators, + doc For your case inflow = outflow on other boundary you need to inverse the sign of the components, w.r.t up/down boundary, that's all ;) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.