Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Couldnt compute study part
Posted 2023年4月2日 GMT-4 12:10 Heat Transfer, Geometry, Mesh Version 5.6 1 Reply
Please login with a confirmed email address before reporting spam
Hi, I have done a TE module design in 3D and also completed mesh but when I go to compute it takes a few minutes and convergence plot show error upto 10^8 and says some error as
"Feature: Stationary Solver 1 (sol1/s1) Failed to find a solution. In Electric Currents: Divergence of the linear iterations. Returned solution is not converged. Not all parameter steps returned."
I tried fine ,normal , coarse, coarser mesh and also changed for user defined value but anyhow the error is the same.
What can I do to fix this? I've tried everything that was advised to me for this problem, but nothing helped.
Thanks, Richi
Please login with a confirmed email address before reporting spam
I don't know what others have advised, but I advise you to post your .mph file to the forum so that the readers here can examine it and offer specific suggestions.
-------------------Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara