Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

cable parameters

Posted 2023年7月19日 GMT-4 16:10 Electromagnetics, Low-Frequency Electromagnetics, Geometry, Mesh, Optimization Version 5.5 1 Reply

Warley de Souza
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I'd like some tips to draw a braided cables used to guided audio signs. Each cable has been made with 4 wires isolated, where each wire has its own isolation.

My aim is to demonstrate that braided cables have lower impedance than straight cables, and so, it can be an advantage to carry audio signs

Thanks in advance!

Warley Leal de Souza

1 Reply Last Post 2023年7月19日 GMT-4 16:22
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 year ago 2023年7月19日 GMT-4 16:22

Hi Warley,

your post made me a little curious and I did a quick search and found this: https://journals.sagepub.com/doi/full/10.1177/1558925020939726

Seems not to be an easy one.

Good luck Edgar

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Hi Warley, your post made me a little curious and I did a quick search and found this: https://journals.sagepub.com/doi/full/10.1177/1558925020939726 Seems not to be an easy one. Good luck Edgar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content