Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Meshing Error
Posted 2023年11月3日 GMT-4 14:21 Wave Optics, Mesh Version 6.0 8 Replies
Please login with a confirmed email address before reporting spam
For the glass substrate model geometry (attached below), I am trying to create a mesh. However, I am encountering this error:
""The current physics settings induce a mesh requirement of about 1.1e+07 elements.
Trying to fulfill this requirement may cause out of memory errors or process locking. Switching to user-controlled mesh.
Please review mesh settings carefully before building the user-controlled mesh, or switch back to physics-controlled mesh and change physics settings.""
Please help me on how I can rectify my physics settings. In my mind, my model is not that complicated, indeed, it's just a slab of Silica glass so I don't understand why the number of elements is that many.
Please login with a confirmed email address before reporting spam
You didn't attach the file.
Jeff
-------------------Jeff Hiller
Please login with a confirmed email address before reporting spam
Here is my mph file.
Please login with a confirmed email address before reporting spam
You didn't attach the file.
Jeff
Attached. Sorry for the delay.
Please login with a confirmed email address before reporting spam
There is still no attached file.
-------------------Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
Please login with a confirmed email address before reporting spam
For plate-like structures, often a swept mesh is a good idea.
Please login with a confirmed email address before reporting spam
Is the .mph attached now? I am really sorry for this delay. I am new to this.
Attachments:
Please login with a confirmed email address before reporting spam
I don't have the ewfd module, but I can see why you get that error if the software tries to generate a physics-controlled mesh. You are trying to model infrared light (1 micron wavelength) in a computational volume that is a one meter in radius and 5 mm thick. You either need to: (1) model something with a much smaller volume or (2) change your computational method to something that doesn't require resolution on the wavelength scale. Good luck.
-------------------Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
Please login with a confirmed email address before reporting spam
Hello Dr. Koslover. Your advice, specifically (2), worked. Thank you very much.