Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

volume within a closed isosurface

Posted 2012年12月4日 GMT-5 21:32 Results & Visualization 3 Replies

Daniel Wellburn
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello

WIthin a 3D domain containing closed isosurfaces, is there a way to calculate the volume of material contained within each isosurface?

Many thanks

Dan
3 Replies Last Post 2012年12月7日 GMT-5 02:58
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年12月5日 GMT-5 01:18
Hi

if you define an integration over a domain, and use the Bolean operand "(My_Var < My_value)" I would expect to get the total volume of the region obeying the Bolean condition, no ?

In COMSOL a 3D integration is by default: integrate_over_my_selections_of_Domains(argument*dx*dy*dz)
while the dx*dy*dz is "implicit" (or it might be 2*pi*r*rd*dz in 2D axi)
--
Good luck
Ivar
Hi if you define an integration over a domain, and use the Bolean operand "(My_Var < My_value)" I would expect to get the total volume of the region obeying the Bolean condition, no ? In COMSOL a 3D integration is by default: integrate_over_my_selections_of_Domains(argument*dx*dy*dz) while the dx*dy*dz is "implicit" (or it might be 2*pi*r*rd*dz in 2D axi) -- Good luck Ivar
Daniel Wellburn
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年12月7日 GMT-5 01:25
HI Ivar

Thanks I hadn't thought of using a boolean expression.

Works perfectly of course

Thanks again

Dan
HI Ivar Thanks I hadn't thought of using a boolean expression. Works perfectly of course Thanks again Dan
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年12月7日 GMT-5 02:58
Hi

one warning, do not use Boolean on average operators, as the normalisation is not taking into account the boolean expression and you get too low values. Then its worth to write out the two integration fully, both with the same boolean expression in the numerator and de-numerator of the average expression

--
Good luck
Ivar
Hi one warning, do not use Boolean on average operators, as the normalisation is not taking into account the boolean expression and you get too low values. Then its worth to write out the two integration fully, both with the same boolean expression in the numerator and de-numerator of the average expression -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content