Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Current/Charge conservation in AC/DC
Posted 2012年12月10日 GMT-5 04:20 Low-Frequency Electromagnetics Version 4.3a 1 Reply
Please login with a confirmed email address before reporting spam
Hello,
My model has several layers of domains having different conductivity and permittivity. I want current to be conserved in each domain independently. At present, I choose current conservation node for respective domains.
After solving, the volume integration of space charge denisty on all domains (i.e. the net charge) is zero. However, each domain is not independently conserved. Is there a way to specify independent charge or current conservation to each domain?
Thanks,
Arun
My model has several layers of domains having different conductivity and permittivity. I want current to be conserved in each domain independently. At present, I choose current conservation node for respective domains.
After solving, the volume integration of space charge denisty on all domains (i.e. the net charge) is zero. However, each domain is not independently conserved. Is there a way to specify independent charge or current conservation to each domain?
Thanks,
Arun
1 Reply Last Post 2012年12月10日 GMT-5 04:40
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
from my understanding, one or several current conservation nodes does not separate the items, by default all internal boundaries are in "continuation mode". If you want to have "isolation between the domains, you need either to use assembly mode, or probably easier add electrical isolation / shielding between your layers on the BC's
--
Good luck
Ivar
from my understanding, one or several current conservation nodes does not separate the items, by default all internal boundaries are in "continuation mode". If you want to have "isolation between the domains, you need either to use assembly mode, or probably easier add electrical isolation / shielding between your layers on the BC's
--
Good luck
Ivar