Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Unsteady Analysis
Posted 2012年12月16日 GMT-5 12:13 Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
I am solving unsteady state navier stokes equation with a volume force term. My volume force term contains a term like sin(t), now i want to make sure that the unit of angle in comsol is radians, inorder to get the correct solution. I dont know how to check the unit of angle(or in fact to say any unit) in comsol. Please help me.
Thanks in advance
I am solving unsteady state navier stokes equation with a volume force term. My volume force term contains a term like sin(t), now i want to make sure that the unit of angle in comsol is radians, inorder to get the correct solution. I dont know how to check the unit of angle(or in fact to say any unit) in comsol. Please help me.
Thanks in advance
1 Reply Last Post 2012年12月16日 GMT-5 16:30
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
angles are in radians (by default) and are without units =="1" except when explicitly written "deg" (this happens for some given BC entries)
In the newer versions there are several angles included in the variables of COMSOL
--
Good luck
Ivar
angles are in radians (by default) and are without units =="1" except when explicitly written "deg" (this happens for some given BC entries)
In the newer versions there are several angles included in the variables of COMSOL
--
Good luck
Ivar