Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Double beam resonator with electrostatic interaction
Posted 2013年1月4日 GMT-5 08:03 MEMS & Nanotechnology, MEMS & Piezoelectric Devices Version 4.1 0 Replies
Please login with a confirmed email address before reporting spam
I'm modeling a structure comprised of two beams (clamped-free), which are facing each other and are totally symmetrical (see image).
The beams are made of a stack of several thin films. There is a piezoelectric layer and an electrode. Both electrode cross-sections are interacting electrostatically. Thus there are vibration modes where both beams oscillate in a harmonic manner.
I am using the piezoelectric interface (pzd). For the non-piezoelectric layers I use the Linear Elastic Material Model.
My problem is, I am unable to get synchronous oscillations when performing eigenfrequency analysis. Instead I am getting eigenfrequencies where only one beam is oscillationg alone. How can I tell Comsol that the electrode cross-sections are in electrostatic interaction and there is coupling?
Any suggestions are welcome.
Thank you!
Attachments:
Hello Don Domat
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.