Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Which Physics should i choose????

Posted 2013年1月10日 GMT-5 00:00 Version 4.2a 2 Replies

Muthuraman Chinnadurai
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello Friends,
Am trying to observe the increase in diameter of a hole for an applied electric field. Since am absolutely new to comsol Multiphysics i find it difficult to choose the type of physics to design with. Expecting your kind support at the earliest.
Thanks in advance.
2 Replies Last Post 2013年1月10日 GMT-5 09:21
L. Queval
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年1月10日 GMT-5 03:28
1) Calculate the force on the boundary of the "hole" for a given applied electric field > Use AC/DC 2D ec, ef or mef (It depends on the exact nature of your problem).
2) Observe the increase in diameter of the "hole" > Use coupling with structural mechanics (but only after 1) is solved).

Good luck

--
L. Queval
1) Calculate the force on the boundary of the "hole" for a given applied electric field > Use AC/DC 2D ec, ef or mef (It depends on the exact nature of your problem). 2) Observe the increase in diameter of the "hole" > Use coupling with structural mechanics (but only after 1) is solved). Good luck -- L. Queval
Muthuraman Chinnadurai
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年1月10日 GMT-5 09:21

1) Calculate the force on the boundary of the "hole" for a given applied electric field > Use AC/DC 2D ec, ef or mef (It depends on the exact nature of your problem).
2) Observe the increase in diameter of the "hole" > Use coupling with structural mechanics (but only after 1) is solved).

Good luck

--
L. Queval


Thank you very much.
[QUOTE] 1) Calculate the force on the boundary of the "hole" for a given applied electric field > Use AC/DC 2D ec, ef or mef (It depends on the exact nature of your problem). 2) Observe the increase in diameter of the "hole" > Use coupling with structural mechanics (but only after 1) is solved). Good luck -- L. Queval [/QUOTE] Thank you very much.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content