density of arrows in contact forces can't be controlled

Please login with a confirmed email address before reporting spam

When there's contact in solid mechanics simulation, there's an automatic node "contact forces" in results. There are Contact 1, Pressure and Contact 1, Friction Force nodes under this node. The density of the arrows (pressure and friction) under these two nodes can't be controlled, as when clicking "uniform" in arrow positioning, no arrow is plotted. Gauss points is the only option but the downside of doing so is that the arrows are too dense if the mesh is fine. How to overcome?


13 Replies Last Post 2024年10月7日 GMT-4 10:56
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 3 weeks ago 2024年9月25日 GMT-4 14:50

The contact forces are shown using a standard Arrow Surface plot. So it has all possible settings for controlling arrow placement and density.

-------------------
Henrik Sönnerlind
COMSOL
The contact forces are shown using a standard *Arrow Surface* plot. So it has all possible settings for controlling arrow placement and density.

Please login with a confirmed email address before reporting spam

Posted: 3 weeks ago 2024年9月26日 GMT-4 01:33
Updated: 3 weeks ago 2024年9月28日 GMT-4 00:36

>The contact forces are shown using a standard Arrow Surface plot. So it has all possible settings for controlling arrow placement and density.

thanks but as the attached picture, it looks different from an arrow surface plot

![](http://)![](http://)![](http://)>The contact forces are shown using a standard *Arrow Surface* plot. So it has all possible settings for controlling arrow placement and density. thanks but as the attached picture, it looks different from an arrow surface plot

Acculution ApS Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 3 weeks ago 2024年9月26日 GMT-4 02:28

There is no attached picture?

-------------------
René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com
There is no attached picture?

Please login with a confirmed email address before reporting spam

Posted: 3 weeks ago 2024年9月26日 GMT-4 03:42
Updated: 3 weeks ago 2024年9月28日 GMT-4 00:38

There is no attached picture?

there seems to be a problem. I tried very hard with different browsers but failed to attach the picture.

>There is no attached picture? there seems to be a problem. I tried very hard with different browsers but failed to attach the picture.

Acculution ApS Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 3 weeks ago 2024年9月28日 GMT-4 03:53

Posting this for OP.

-------------------
René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com
Posting this for OP.

Acculution ApS Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 3 weeks ago 2024年9月28日 GMT-4 03:55

Trying again

-------------------
René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com
Trying again

Acculution ApS Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 3 weeks ago 2024年9月28日 GMT-4 03:55

Okay, I don't know how to upload pictures here either, sorry.

-------------------
René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com
Okay, I don't know how to upload pictures here either, sorry.

Please login with a confirmed email address before reporting spam

Posted: 3 weeks ago 2024年9月29日 GMT-4 00:17
Updated: 2 weeks ago 2024年10月7日 GMT-4 05:14

Dr Christensen thanks so much! Can any forum admin help? There must be a bug with uploading pictures. It used to work!

Dr Christensen thanks so much! Can any forum admin help? There must be a bug with uploading pictures. It used to work!


Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 3 weeks ago 2024年9月30日 GMT-4 02:26

The problem has been reported to the IT team.

-------------------
Henrik Sönnerlind
COMSOL
The problem has been reported to the IT team.

Please login with a confirmed email address before reporting spam

Posted: 2 weeks ago 2024年10月5日 GMT-4 00:41

has this IT issue been resolved?

has this IT issue been resolved?

Edgar J. Kaiser Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 2 weeks ago 2024年10月5日 GMT-4 04:33
Updated: 2 weeks ago 2024年10月5日 GMT-4 04:53

Picture upload test: Enjoy!

It is often much easier and faster to test things rather than waiting for a forum response. And it is obvious that some people had been uploading pictures very recently.

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Picture upload test: Enjoy! It is often much easier and faster to test things rather than waiting for a forum response. And it is obvious that some people had been uploading pictures very recently.


Please login with a confirmed email address before reporting spam

Posted: 2 weeks ago 2024年10月7日 GMT-4 05:15

please check this attached picture related to my question

please check this attached picture related to my question


Edgar J. Kaiser Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 2 weeks ago 2024年10月7日 GMT-4 10:56

Pictures and screenshots are mostly not very useful. Consider to post the model.

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Pictures and screenshots are mostly not very useful. Consider to post the model.

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.