Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Solid mechanics and element settings

Posted 2013年2月9日 GMT-5 07:47 Mesh, Structural Mechanics Version 4.2 2 Replies

Erkki Holopainen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi!
I am analysing stresses and displacements of simple 2D steel plate with Comsol 4.2. I need to get results calculated by triangle linear plane stress elements for comparison.

How can I change element type to linear? Comsol seems to use quadratic elements by default?
2 Replies Last Post 2013年2月10日 GMT-5 04:21
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年2月9日 GMT-5 10:02
Hi

yes COMSOL uses 2nd order (mostly) elements, this is under "Discretization" tab of your main physics node, but it appears only if you turn the extra view mode on: check your "options parameters" and turn discretization view "on" (there are several others there to once you start to understand the details to COMSOL, I run with all on ;)
but it makes your screen full of tabs you do not always need to access

--
Good luck
Ivar
Hi yes COMSOL uses 2nd order (mostly) elements, this is under "Discretization" tab of your main physics node, but it appears only if you turn the extra view mode on: check your "options parameters" and turn discretization view "on" (there are several others there to once you start to understand the details to COMSOL, I run with all on ;) but it makes your screen full of tabs you do not always need to access -- Good luck Ivar
Erkki Holopainen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年2月10日 GMT-5 04:21

Thanks Ivar! I got it now.


--
Student
Engineering Mechanics
Thanks Ivar! I got it now. -- Student Engineering Mechanics

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content